How Long Does Liquid Nails Take to Dry?

How long does Liquid Nails take to dry? And can you speed up the drying process? Don’t worry — we’ll cover this and much more in our complete guide below. Read on to learn all you need to know.

How Long Does Liquid Nails Take to Dry?

If you are looking for a safer alternative to the trusty old nail and hammer, look no further than Liquid Nails.

Liquid Nails adhesive products can be used to bond many different materials, such as tile, ceramic, metal, rubber, glass, wood, leather, and foam. And as a liquid adhesive, it’s much safer than traditional nails.

But there is one thing you need to keep in mind when using them: the drying time. So, how long does Liquid Nails take to dry?

Liquid Nails adhesive begins to dry in about 15 minutes, though it takes about seven days to reach its maximum strength. The actual dry time varies depending on the adhered materials and other factors such as humidity and temperature.

Read more  How Long Does Essie Nail Polish Take To Dry?

Want to learn more about Liquid Nails? Keep reading to learn all you need to know.

How to Make Liquid Nails Dry Faster

How long for liquid nail to dry

New Africa/Shutterstock

If you want to get your project finished and cannot wait the recommended 7 days, there are a few things that you can do to make Liquid Nails dry faster:

  • Lower temperatures can make constructive adhesives like Liquid Nails dry more slowly. For example, adhesives used at 70 degrees Fahrenheit can take half as long to dry as those used at 50 degrees Fahrenheit. Liquid Nails recommends applying their adhesives between a minimum temperature of 40 degrees Fahrenheit and a maximum of 90 degrees Fahrenheit.
  • Use only what you need. Large amounts of Liquid Nails adhesive will take longer to dry, so be sure to follow the recommended guidelines for your project as indicated on the package.
  • Use a fan to help decrease any humidity in the area, as humidity and moisture can also increase your drying time. Do not face the fan directly on the adhered surfaces but try and get a cross breeze going to improve the airflow.
  • Ensure that at least one of the materials is porous, as nonporous surfaces can significantly slow drying time.

How to Remove Liquid Nails

While Liquid Nails is meant for durable bonding, it is possible to separate adhered materials — if you catch it in time.

How to Remove Liquid Nails From Skin

  • For solvent-based Liquid Nails: Apply vegetable oil, mineral oil, or petroleum jelly to the affected area. Repeat if necessary.
  • For latex-based Liquid Nails: Wash the affected area thoroughly with soap and water.

Read more  6 Ways To Make Press On Nails Last Longer

How to Remove Liquid Nails From Building Materials

If you need to just scrape some off of a surface, you can soften Liquid Nails adhesive by using an electric heat gun or blow dryer. Apply heat until it reaches above 140 degrees Fahrenheit.

You can also apply some petroleum jelly or mineral oil until it becomes soft enough to scrape off, which can take hours to days. Softened liquid nails is much easier to remove.

If you need to separate two bonding surfaces or adhered materials, though, it can be a much longer process:

Step 1: Gather materials

  • Music wire/windshield cut-out wire
  • Wire cutters
  • Heavy-duty safety gloves and/or handles
  • Safety goggles or face shield
  • Two screwdrivers

Step 2: Work the wire under the part’s edge

Using a length of wire that’s about 2-3 feet longer than the part you are removing, work the middle of the wire under the part’s edge. Be sure to start in a corner.

At this point, if you are using handles, connect them to the wire. If not, make sure to wear safety gloves when working with any Liquid Nail product.

Step 3: Saw using the wire.

Using moderate pressure, use the wire to saw a few inches through the part with adhered surfaces.

Step 4: Prop open the gaps.

Once you have made it through a few inches, use the screwdriver to keep the gap open. The friction from the sawing motion will heat the Liquid Nails, causing it to become soft again. And the screwdrivers are there to prevent the materials from re-adhering.

Read more  Is Nail Polish Remover Same as Rubbing Alcohol?

Step 5: Continue sawing until the part is loose.

Keep moving the screwdrivers as you continue sawing. Once it has become loose enough, remove the part.

Step 6: Scrape away any remaining Liquid Nails adhesive.

If you still can’t get it all off, apply a thin layer of baby oil to the adhesive and try scraping it again in about an hour. Repeat if necessary.

Frequently Asked Questions

How long for liquid nail to dry


Is Liquid Nails Stronger Than Wood Glue?

It depends on the project. Wood glue is typically stronger when it comes to wood in particular, but Liquid Nails can be better than wood glue in many other situations.

For example, Liquid Nails is better if…

  • You’re adhering to nonporous surfaces
  • You’re unable to clamp your project
  • Any gaps need to be filled
  • You need to get work done quickly

So, How Long Does Liquid Nails Take to Dry?

Liquid Nails takes about 15 minutes to adhere, but takes on average 7 days to fully harden. Be sure to consider the type of materials you’re bonding, limit exposure to heat and humidity, and you’ll have a rock solid bond in no time.


Recommended For You

About the Author: Tung Chi